NCERT Solutions For Chapter 14: Semiconductor Electronics

Education Journalist | Study Abroad Lead

NCERT Solutions for Class 12 Physics Chapter 14 Semiconductor Electronics: Materials, Devices and Simple Circuits are provided in the article below. A semiconductor is a material whose resistivity is between a conductor such as metallic copper and an insulator such as glass. Its resistivity falls as the temperature rises which is completely opposite to any metal.

Class 12 Physics Chapter 14 Semiconductor Electronics belong to Unit 9 - Electronic Devices which has a weightage of 7 marks in the CBSE Board examinations. Class 12 Physics Semiconductor Electronics NCERT Solutions covers the concepts of intrinsic and extrinsic semiconductors, P-n Junction, and Rectifiers

Download PDF: NCERT Solutions for Class 12 Physics Chapter 14

NCERT Solutions for Class 12 Physics Chapter 14

Class 12 Physics Chapter 14 – Topics Covered

Semiconductors have resistivity or conductivity in between that of metals and insulators.

ρ ~ 10^-5. 10⁶ Ωm, σ ~ 10⁺⁵ .10^-6 Sm^-1

Types of Semiconductors: There are two types of semiconductors – Elements Semiconductors and Compound Semiconductors.

(i) Elements Semiconductors are available in natural form, e.g. germanium and silicon.
(ii) Compound Semiconductors are made by compounding the metals, e.g. InP, CdS, polyaniline, GaAs, CdSe, anthracene, etc.

On the basis of purity, semiconductors are classified as intrinsic semiconductors and extrinsic semiconductors.
Intrinsic Semiconductors are pure semiconductor that does not have any significant dopant species present

n_e = n_h = n_i

where, n_e and n_h are the number densities of electrons and holes respectively and n_i is the intrinsic carrier concentration.

Extrinsic Semiconductors are pure semiconductors that are doped with an impurity.

Extrinsic semiconductors are classified into two types: p-type semiconductors and n-type semiconductors.

Formation of Depletion Region in p-n junction: During the formation of a p-n junction, due to the concentration gradient across the p and n sides, the holes diffuse from the p-side to the n-side and electrons diffuse from the n-side to the p-side.

Formation of Depletion Region in p-n junction

Formation of Depletion Region in p-n junction

Also Read:

Chapter 14 Related Articles
Junction Transistor	Classification of Metals, Conductors, and Semiconductors	Zener Diode as Voltage Regulator
Full Wave Rectifier	Integrated Circuits	Half Wave Rectifier
Uses of Zener Diode	Difference between Diode and Rectifier	Digital Electronics and Logic Gates
Application of Junction Diode as a Rectifier	Semiconductor Diode	Zener Diode

Check-Out:

PCMB Study Guides
NCERT Solutions for Class 12 Physics	Class 12 Physics Notes	Formulas in Physics
Topics for Comparison in Physics	Choice-based questions in physics	Topics in relation to physics
Physics Study Notes	Class 12 Physics Book PDF	Class 12 Physics Practicals
Important Derivations in Physics	SI units in Physics	Important Physics Constants and Units
Class 12 Physics Syllabus	Mendeleev's Periodic Table	NCERT Solutions for Class 12 Biology
NCERT Solutions for Class 12 English	NCERT Solutions for Class 11 Chemistry	Class 12 Chemistry Practicals
Class 12 Chemistry Notes	Important Chemical Reactions	Class 12 Maths Notes
Class 12 PCMB Notes	NCERT Class 12 Biology Book	NCERT Class 12 Maths Book
NCERT Class 12 Textbooks	NCERT Solutions for Class 11 Maths	NCERT Solutions for Class 11 Physics
NCERT Solutions for Class 12 Maths	NCERT Solutions for Class 11 Biology	NCERT Solutions for Class 11 English
NCERT Class 11 Chemistry Book	NCERT Class 11 Physics Book	NCERT Class 11 Biology Book
Class 11 Notes	Important Maths Formulas	Important Chemistry Formulas
Class 11 PCMB Syllabus	Chemistry Study Notes	Biology Study Notes
Periodic Table in Chemistry	Important Chemical Reactions	Comparison topics in Chemistry
Comparison Topics in Maths	Biology MCQs	Important Named Reactions
Maths MCQs	Comparison Topics in Biology	Chemistry MCQs

CBSE CLASS XII Related Questions

1.
Write two advantages of reflecting telescope over refracting telescope.

View Solution

2.
Derive an expression for the capacitance of a parallel plate capacitor of plate area A and plate separation d with air present between the plates.

View Solution

3.
Two air-filled capacitors of capacitances $C_1$ and $C_2$ are connected in parallel with a dc battery. After the capacitors are fully charged, a slab of dielectric constant K is inserted between the plates of each capacitor. How will the (i) charge on each capacitor and (ii) energy stored in the capacitor affected after the slab is introduced.

View Solution

4.
A charged particle $+q$ in an electric field $\vec{E}$ experiences a force in the direction of the electric field. As a result, its kinetic energy changes. Similarly, the charged particle also experiences a force when it moves in a magnetic field $\vec{B}$. But this magnetic force is perpendicular to both velocity $\vec{v}$ of the charged particle and the magnetic field $\vec{B}$, so it cannot change the kinetic energy of the charged particle. Consider two charged particles 1 and 2 of masses $m$ and $\frac{m}{2}$ having charges $-q$ and $+2q$ respectively. They are accelerated from rest through the same potential difference $V$ and acquire kinetic energy $K_1$ and $K_2$. Then they enter in a region of uniform magnetic field $\vec{B}$ perpendicular to their velocities.

5.
Consider the nuclear reaction $ X \to Y + Z $. Let $ M_x $, $ M_y $, and $ M_z $ be the masses of the three nuclei X, Y, and Z respectively. Then which of the following relations hold true?

$ (M_x - M_z)<M_y $
$ (M_x - M_y)<M_z $
$ M_x>(M_y + M_z) $
$ M_x<(M_y + M_z) $

View Solution

6.
Capacitors are manufactured with certain standard capacitances and working voltages. However, these standard values may not be the ones that are actually needed in a particular application. Two or more capacitors can be grouped in series or in parallel to achieve desired capacitance and voltage. When connected in series, the total capacitance decreases while the voltage rating increases, whereas in parallel connections, the total capacitance increases and maintains the same voltage rating. A capacitor stores energy in the electric field between its plates and stored energy is proportional to the square of the voltage and capacitance $U = \frac{1}{2}CV^2$, where symbols have their usual meanings.
Two capacitors, one of $3 \ \mu$F and the other of $6 \ \mu$F, are connected in series in the circuit as shown in the figure, for a long time. }

NCERT Solutions For Chapter 14: Semiconductor Electronics

NCERT Solutions for Class 12 Physics Chapter 14

Class 12 Physics Chapter 14 – Topics Covered

CBSE CLASS XII Related Questions

1.
Write two advantages of reflecting telescope over refracting telescope.

2.
Derive an expression for the capacitance of a parallel plate capacitor of plate area A and plate separation d with air present between the plates.

5.
Consider the nuclear reaction \( X \to Y + Z \). Let \( M_x \), \( M_y \), and \( M_z \) be the masses of the three nuclei X, Y, and Z respectively. Then which of the following relations hold true?

Similar Physics Concepts

Comments

dOGVmW

NCERT Solutions For Chapter 14: Semiconductor Electronics

NCERT Solutions for Class 12 Physics Chapter 14

Class 12 Physics Chapter 14 – Topics Covered

CBSE CLASS XII Related Questions

1.Write two advantages of reflecting telescope over refracting telescope.

2.Derive an expression for the capacitance of a parallel plate capacitor of plate area A and plate separation d with air present between the plates.

5.Consider the nuclear reaction \( X \to Y + Z \). Let \( M_x \), \( M_y \), and \( M_z \) be the masses of the three nuclei X, Y, and Z respectively. Then which of the following relations hold true?

Similar Physics Concepts

Comments

dOGVmW

1.
Write two advantages of reflecting telescope over refracting telescope.

2.
Derive an expression for the capacitance of a parallel plate capacitor of plate area A and plate separation d with air present between the plates.

5.
Consider the nuclear reaction \( X \to Y + Z \). Let \( M_x \), \( M_y \), and \( M_z \) be the masses of the three nuclei X, Y, and Z respectively. Then which of the following relations hold true?